Nashua #396 Silver Duct Tape (Case)
Nashua Duct tape, Type 396, 2” x 60 yds
or Nashua Duct tape, Type 396, 3” x 60 yds 
SOLD BY THE CASE
Excellent for home and general repair, bundling, patching & mending.
Emergency tape for automotive breakdown.
Used for repairing pool liners, garden hoses, auto upholstery, etc.
Thickness: 10 mils;
adhesion: 46 oz/inch;
tensile strength: 25 lbs/inch;
maximum temperature: 200°F |
Nashua 300 Silver Duct Tape (Case)
Nashua Duct tape, Type 300, 2” x 60 yds 
or Nashua Duct tape, Type 300, 3” x 60 yds 
This tape is excellent for general repair, bundling, patching and mending, conformable, excellent adhesion to variety of surfaces, no curl. Versatile polyethylene coated cloth tape. Conforms well to irregular surfaces. Tears straight, hangs straight, curl resistant. Rubber adhesive, polyethylene coated cloth backing.
Available in silver.
|
Arrow T50 Stapler
Specifications
- Staple Range: 1/4" to 9/16" & Ceiltile
- Staple Type: Arrow T50FS
- Staple Capacity: 85

Features
- Chrome finish, all-steel construction.
- High-carbon hardened steel working parts.
- Visual refill window.
- Patented jam-proof mechanism.
- Easy squeeze double leverage operation.

Comments
The T50 stapler is used by building contractors, do-it-yourselfers and specialty trade applicators for stapling insulating, ceiling tile, window screening, upholstery, carpet padding, fence wire and more.
|
|
Arrow T50 Staples 1/4"
Note: These staples come in 80 packs per carton. If you are ordering in bulk, it is easier to ship if your order is in multiple quantities of 80.
Available in 1/4" size
|
P22 Heavy Duty Stapler Plier Type
PLIER TYPE STAPLER
- All-steel construction
- Hand guide loop
- Cam actuated double leverage
- 2-1/2" throat depth
- Easy-to-get-at mechanism
- Loads (150) Arrow P22 staples only
- Uses 1/4" and 5/16" staples
|
P22 Heavy Duty Staples 5/16"
Arrow's P22 staples are intended for use with the P22 heavy duty industrial plier type stapler. This model has a leg length of 5/16-inch.
|
Spray-rite Adhesive
|
Grayling Tack Spray Adhesive
|
Barricade "Danger Asbestos" Banner Tape
- Surround and cordon-off danger zones, hazardous locations, or restricted areas with highly visible barricade tapes. Barricade tapes are a quick, temporary, and effective means of sending a warning message to those to keep out. Ideal for crowd and traffic control purposes. The bold message is printed repeatedly along the continuous length of the tape. Tape is lightweight, durable 3-mil polyethylene plastic that is non-adhesive and self-wound tightly on rolls. Material is economical and disposable. Unspool the roll, cut or tear to length the tape, and put it up with adhesive tape, nails, or tie it off. Available in 3" wide x 1000' rolls.
|
Grayling 44x60 Glove Bags Extended Run
Features:
- 25 bags per roll
- The basic Extended-Run glovebag. This economy model has all the features of the Available line except the entry ports. Enclose pipe diameters up to 8" in runs of 6' to 91' of horizontal pipe. Each of the 25 chambers measures 44" x 60" allowing you to cut of as many or as few as you need. One arm set per chamber, stocked in 6 mil, available in 10 mil special order.

|
Grayling 54x60 Glove Bags Extended Run
Features:
- 25 bags per roll
- The glovebag that set the industry standard for efficiency and safety. This contractor's favorite encloses pipe insulation diameters up to 10", and can safely contain 8' to 112' of horizontal pipe. Each of the 25 chambers measures 54" x 60" with one arm set per chamber, stocked in 6 mil , available in 10 mil special order.

|
Grayling 60x72 Glove Bags Extended Run
Features:
- 20 bags per roll
- The workhorse for extended-runs of large diameter pipe. Encloses pipe diameters up to 14", and can safely contain anywhere from 8' to 100' of horizontal pipe. Each of the 20 chambers measure 60" x 72", allowing you to cut off as few or as many as you need. One arm set per chamber, stocked in 6 mil and available in 10 mil special order.

|
Grayling 72x120 Glove Bags Extended Run
Features:
- 10 bags per roll
- The standard, single-use glove bag that revolutionized the industry with labor saving features. Smart design details such as quick attach collars, HEPA/water entry ports, Fiber Guard glove sleeves and arm openings placed so the weight of debris doesn’t rest on the worker make these bags the choice of abatement professionals.

|
Grayling 66x84 Glove Bags Extended Run
Features:
- 15 bags per roll
- This revolutionary way to tackle extended runs of pipe insulation dramatically increases productivity and safety by eliminating multiple bag setup time and reducing job site fiber counts. Used in sections up to 25 chambers at a time, professional abatement crews use extended runs for increased speed, efficiency and safety in large scale removal jobs.

|
Grayling QT10 Quick Twist Glove Bags
Features:
- 20 bags per roll
- The most popular, and versatile glovebag in the collection, the QT10 fits pipe diameters up to 10" and removes 42" to 54" of pipe insulation per bag. It handles 40% more insulation than a 4460 style glovebag. This bag replaces the 4460 through 6060 style glovebags.

|